Soft starter ATS480 17A 208 to 690V.
SKU: ATS480D17Y
Brand: Schneider
Product Specifications
| Manufacturers Part Number | ATS480D17Y |
| Primary Stock Unit | Each |
| Supplier | Schneider |
| Product or Component Type | Soft Starter |
| AC Voltage | 690V |
| Amps | 17A |
| Analogue Input Number | 1 |
| Armoured | False |
| Brake Chopper Integrated | False |
| Colour Select | False |
| Communication Data Link | Serial |
| Communication Port Protocol | Modbus Serial |
| Computer Port | False |
| Connector Type | 1 RJ45 |
| Contact Position Indicator | False |
| Countersunk | False |
| Customizable | False |
| Data Format | 8 Bits |
| Depth | 203mm |
| Device Connection | in The Motor Supply Line/To The Motor Delta Terminals |
| Device Short Name | ATS480 |
| Discrete input Number | 4 |
| Discrete Output Number | 2 |
| Display Screen Available | True |
| Driver Required | False |
| EMC Limit Value (complied) | False |
| Emergency | False |
| Enclosure Accessory | False |
| Environmental Class (During Operation) | Class 3C3 According To IEC 60721-3-3/Class 3S2 According to IEC 60721-3-3 |
| Flexible | False |
| IEC | False |
| Infrared | False |
| Input AC/DC | AC |
| Input Voltage | 690V |
| Integrated Motor Overload Protection | True |
| IP Rating | IP20 |
| IP Rating Info | IP20 |
| Lamps Included | False |
| LSZH | False |
| Managed | False |
| Marking | CE;CCC;UKCA;EAC;RCM;cULus |
| Max Acceleration Under Shock Impact (During Operation) | 150 m/s² at 11 ms |
| Max Acceleration Under Shock Load (During Storage) | 100 m/s² at 11 ms |
| Max Acceleration Under Shock Load (During Transport) | 100 m/s² at 11 ms |
| Max Acceleration Under Vibrational Stress (During Operation) | 10 m/s² at 13...200 Hz |
| Max Acceleration Under Vibratory Load (During Storage) | 15 m/s² at 200...500 Hz;10 m/s² at 9...200 Hz |
| Max Acceleration Under Vibratory Load (During Transport) | 15 m/s² at 200...500 Hz;10 m/s² at 9...200 Hz |
| Max Deflection Under Vibratory Load (During Operation) | 1.5 mm at 2...13 Hz |
| Max Deflection Under Vibratory Load (During Storage) | 1.75 mm at 2...9 Hz |
| Max Deflection Under Vibratory Load (During Transport) | 1.75 mm at 2...9 Hz |
| Motor Rated | False |
| Mounting | Panel Mount |
| Network Frequency | 50 Hz,60 Hz |
| Neutral Bar Included | False |
| Number of Phases | 3 Phase |
| Operating Element Present | False |
| Operating Position | Vertical +/- 10 Degree |
| Optical Interface Present | False |
| Physical Interface | 2-Wire RS 485 |
| Pollution Degree | Level 3 |
| Power Loss Per Device Current Dependent | 38 W |
| Power Loss Static Current Independent | 25 W |
| Power Over Ethernet (POE) | False |
| Power Select | False |
| Product Certifications | CE|cULus|CCC|UKCA|RCM|EAC|DNV|ABS|BV|CCS |
| Product Destination | Asynchronous Motors |
| Product Specific Application | process and infrastructures |
| Range or Series | Altivar Soft Starter ATS48 |
| RCD Included | False |
| Rechargable | False |
| Relay Output Number | 3 |
| Sensor | False |
| Standards | EN/IEC 60947-4-2;UL 60947-4-2;IEC 60664-1 |
| Suitability for Isolation | False |
| Suitable for Mounting on to Standard Rails | False |
| Supporting Protocol for AS-Interface Safety at Work | False |
| Supporting Protocol for ASI | False |
| Supporting Protocol for BACnet | False |
| Supporting Protocol for CAN | False |
| Supporting Protocol for Data-Highway | False |
| Supporting Protocol for DeviceNet | False |
| Supporting Protocol for DeviceNet Safety | False |
| Supporting Protocol for EtherNet/IP | False |
| Supporting Protocol for Foundation Fieldbus | False |
| Supporting Protocol for INTERBUS | False |
| Supporting Protocol for INTERBUS-Safety | False |
| Supporting Protocol for KNX | False |
| Supporting Protocol for LON | False |
| Supporting Protocol for MODBUS | False |
| Supporting Protocol for other bus systems | False |
| Supporting Protocol for PROFIBUS | False |
| Supporting Protocol for PROFINET CBA | False |
| Supporting Protocol for PROFINET IO | False |
| Supporting Protocol for PROFIsafe | False |
| Supporting Protocol for SafetyBUS P | False |
| Supporting Protocol for SERCOS | False |
| Supporting Protocol for SUCONET | False |
| Supporting Protocol for TCP/IP | False |
| Through Power | False |
| Tiltable | False |
| Torque Control | True |
| Transmission Frame | RTU |
| Transmission Rate | 1200...256000 bit/s |
| [Ui] Rated Insulation Voltage | 690 V |
| [Uimp] Rated Impulse Withstand Voltage | 6 kV |
| USB Included | False |
| Utilisation Category | AC-3A|AC-53A |
| Visible Break | False |
| Voltage | 208V to 690V AC |
| Width | 160mm |
While every effort has been made to ensure the accuracy of the product specifications listed on this page, we hold no responsibility for any errors or omissions.
We highly recommend verifying the details directly with the manufacturer to ensure the most up-to-date and accurate information.
___________________________
CUSTOMER SERVICES
___________________________
POPULAR BRANDS
PDL
ABB
Schneider
Klein Tools
Philips
Allen-Bradley
Simx
Prysmian
Trical
___________________________
POPULAR SUPPLIERS
Schneider
Marley
Vynco
Simx
Philips Lighting
Firstflex
NHP
Computer Dynamics
Hugo Lighting
NSG Trading Ltd